| Phase: | Single Phase |
|---|---|
| Type: | On-line |
| Protection: | Overvoltage |
| Application: | Home Power Supply |
| Classification: | Lighting/Power |
| Standby UPS: | Sine Wave Output UPS |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier P5K is a new generation of household energy storage system with two output specifications of 220V and 110V, which
can meet the diversified needs of global users. The P5K energy storage system adopts a modular design, including power
modules and battery expansion modules, so it can be easily combined into a system of any capacity required by the user.
The lithium iron phosphate batteries with high performance and long service life are used in the energy storage module.
Meanwhile, the modular structure design is adopted. Each energy storage module is internally integrated with the intelligent
BMS system, which can be easily expanded and can be combined into 75Kwh battery pack at most.
The typical topological diagram for application of the system is as follows:
P5K series energy storage system supports the capacity expansion with up to fifteen energy storage modules.
The voltage of a single battery is 51.2V and the capacity is 100Ah.
The communication BMS can communicate with the upper computer through RS232 interface, so that various
information of the battery can be monitored through the upper computer, including battery voltage, current,
temperature, status and battery production information. The default baud rate is 9600bps.
CAN communication
CAN communication, the default communication rate is 250K.
RS485 communication
With dual RS485 interface, you can view the pack information. The default baud rate is 9600bps. If it is necessary to
communicate with the monitoring equipment through RS485, the monitoring equipment, as the host, polls the data
according to the address.
Package |
No. | Item | General Parameter | Remark | |
| 1 | Combination method | POWRISE-5000W | |||
| 2 | Rated Capacity | Typical | 100Ah | Standard discharge after Standard charge (package) | |
| Minimum | 100Ah | ||||
| 3 | Factory Voltage | 51V-53V(40-60%) | Mean Operation Voltage | ||
| 4 | Voltage at end of Discharge | 40-44V | Discharge Cut-off Voltage | ||
| 5 | Charging Voltage | 56-58V | |||
| 6 | Internal Impedance |
≤40mΩ | Internal resistance measured at AC 1KHZ after 50% charge The measure must uses the new batteries that within one week after shipment and cycles less than 5 times |
||
| 7 | Standard charge |
Constant Current 20A Constant Voltage see No.50.02CA cut-off |
Charge time : Approx 5 . 0 h | ||
| Limiting current | 80A | ||||
| 8 | Standard discharge | Constant current:20A end voltage see NO.4 | |||
| 9 | Maximum Continuous Charge Current | 100A | ≥10ºC | ||
| 10 | Maximum Continuous Discharge Current | 100A | ≥10ºC | ||
| 11 | Operation Temperature Range |
Charge : 0~55ºC | 60±25%R.H.Bare Cell |
||
| Discharge : -20~60ºC | |||||
| 12 | Storage Temperature Range |
Less than 12 months: -10~35ºC |
60±25%R.H.at the shipment state | ||
| less than 3 months: -10~45ºC |
|||||
| Less than 7 day:-20~65ºC | |||||
| 13 | Dimensions | 635*400*165mm | Include Bracket | ||
| 14 | Weight | Approx :46.5kg | |||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}