| Customization: | Available |
|---|---|
| Type: | Lithium-Ion Battery Pack |
| Connection Mode: | Series Connection |
|
Still deciding? Get samples of US$ 645/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
POWRISE LiFePO4 battery system is specially optimized for PV APPLICATION, mainly used for the energy store battery of Photovoltaic system; its advance intelligent lithium battery management technology to ensure the intelligent automatic management. With "Energy transfer" balanced patented technology, POWRISE lithium iron phosphate provide high efficiency balanced and prolong system operate life. Based on its own technical features as high capacity, high voltage and free of pollution, the lithium iron battery is widely concerned by people with a rapid development stance. It will be the first choice for the high requirement energy store battery solution.
| Combination method | 16S1P |
| Rated capacity | Typical/Minimum 100Ah (Standard discharge after standard charge) |
| Factory voltage | 51V~53V (40~60%) means operation voltage |
| Voltage at end of discharge | 40~44V (Discharge cut-off voltage) |
| Charging voltage | 56~58V |
| Internal impedance | ≤40Ω |
| Standard charge | Approx 5 hours |
| Limited current | 80A |
| Standard discharge | Constant current 20A ebd voltage |
| Maximum continuous charge current | 100A ≥10ºC |
| Maximum continuous discharge current | 100A ≥10ºC |
| Operatipon temperature range | Charge: 0~55ºC, Discharge: -20~60ºC (60±25% R.H. Bare cell) |
| Storage temperature range | Less than 12months -10~35ºC |
| Less than 3months -10~45ºC | |
| Less than 7days -20~65ºC | |
| Dimension | 635*400*192 mm |
| Weight | Approx: 46.3kg |
| Items | Details | Standard |
| Cell overcharge protection | Overcharge detection voltage | 3.65±0.025V |
| Overcharge detection delay time | Typical: 1.0s | |
| Overcharge release voltage | 3.38±0.02V | |
| Cell over-discharge protection | Over-discharge detection voltage | 2.5±0.02V |
| Over-discharge detection delay time | Typical: 1.0s | |
| Over-discharge release voltage | 2.9±0.02v or charge release | |
| Over-current protection | Discharge over-current protection current1 | 130±10A |
| Discharge over-current detection delay time1 | 1s | |
| Discharge over-current protection current2 | 150±10A | |
| Discharge over-current detection delay time2 | ≤100m±50ms | |
| Charge OC protection current | 130±10A | |
| Short circuit protection | Short circuit protection current | 350±10A |
| Protection condition | Load short | |
| Detection delay time | ≤300us | |
| Protection release condition | Charging release | |
| Temperature (T) protection | Charge high T protection | 55±3ºC |
| Charge high T recover | 50±5ºC | |
| Discharge high T protection | 65±5ºC | |
| Discharge high T recover | 60±5ºC | |
| Charge low T protection | -5±5ºC | |
| Charge low T recover | 0±5ºC | |
| Discharge low T protection | -20±5ºC | |
| Discharge low T recover | -15±5ºC | |
| Balance | Balance threshold voltage | 3.45V |
| Communication | It has RS232/RS485 and canbus standard communication interface, it can real-time monitoring the capacity of the battery bank, the voltage, current, environment temperature and charging/discharging current | |
| Alarm | It has over-temperature, over charge, under-voltage, over-current, shot circuit alarm function | |
){kind=link}